- Models Below Include Tap Arm, 1 HP Air Powered Tap Motor, BILZ Tap Chuck
- Shipped Fully Assembled
- 12-1/4" to 37" (312 TO 940mm) Radial Working Range
- Quick Change Size 1 Chuck fits Tap Adapters from 0 to 9/16" (M14) capacity and Extended Range Holders up to 7/8" (M22) Threads
- 3 Year Wear-Out Warranty on Arm & Float Cylinder, regardless of number of cycles
- 30 cfm (14 l/s) required @ 90 psi max
ETA Model # | Price** | Free Speed RPM | Max Tap Size MILD STEEL* |
Max Tap Size ALUMINUM* |
Torque in. Lb (Nm) |
Hole Orientation | Air Prep | Tap Adapters | 3D Model |
TA45-N | $1,595 | 300 | 5/8" (M16) | 3/4" (M18) | 400 (45) | VERTICAL | F/R/L NOT INCLUDED |
PURCHASED INDIVIDUALLY [Tap Adapters] |
CAD |
TA37-N | 500 | 1/2" (M12) | 5/8" (M16) | 325 (37) | |||||
TA25-N | 700 | 3/8" (M10) | 1/2" (M12) | 220 (25) | |||||
TA16-N | 1,200 | 1/4" (M6) | 3/8" (M10) | 145 (16) | |||||
* Maximum tap sizes are conservatively based on actual shop tests, but are dependent on a number of factors including air supply volume, hole size, hole depth, tap configuration, tap dullness, thread cutting lubrication and tap motor lubrication. If your application requires thread sizes at or near the limits above, as a free service ETA will test your sample parts with your tap using a TA Series Tapping Arm. Consult your ETA distributor or contact us at ETA directly to make arrangements. ** Suggested Trade Price in US$ in North America. ETA Tap Arm Systems are available through Authorized ETA Distributors only. |